Racor 120AS Fuel Filter Water Separator: High-Performance And Cost-Efficient Solution For Marine Engines

The Racor 120AS Fuel Filter Water Separator is an excellent choice for those looking for a dependable and cost effective solution for their fuel filtration needs. This filter has been designed to provide superior protection against water and sediment from entering your engine, keeping it running smoothly and efficiently. It also features a spin-on, easy change element that provides quick and easy maintenance. The Racor 120AS offers superior performance, efficiency and reliability at an affordable price.

This filter is constructed with high quality components, including a durable, corrosion-resistant metal housing and a patented Aquabloc® media that captures particles up to 10 microns in size. This helps to ensure optimal performance while preventing clogging or blockage of the system. The Racor 120AS also features dual-stage filtration technology, which provides superior filtration of both fine particulates and water contamination. Additionally, the spin-on design allows for quick and easy installation without any tools.

Overall, the Racor 120AS Fuel Filter Water Separator is an excellent option for those looking for reliable fuel filtration solutions at an affordable price. With its superior performance, reliability and ease of use, this filter will provide peace of mind knowing your engine is properly protected from dirt and water contamination. In the next section we’ll take a closer look at some of the key features of this product so you can make an informed decision about whether it’s right for you.

Table of Contents

Racor 120AS Fuel Filter Water Separator Review

The Racor 120AS Fuel Filter Water Separator is a must-have for any engine that runs on diesel fuel. This innovative fuel filter and water separator is designed to help keep your engine running smoothly and efficiently, while also protecting it from potential damage caused by dirt, debris, and other contaminants. The Racor 120AS is a simple-to-install solution that is both cost-effective and reliable.

Key Features:

1. Installs quickly and easily with no additional tools required.

2. Filters particles down to 2 microns in size for maximum protection.

3. Built-in sight glass for easy inspection.

4. High capacity design for extended service intervals.

5. Easy-to-change element for quick maintenance.

6. Corrosion resistant construction for long-term durability.

7. Can be used with gasoline, diesel, and kerosene.

With the Racor 120AS Fuel Filter Water Separator you can enjoy peace of mind knowing that your engine is receiving the best possible protection against harmful contaminants. Not only does it provide superior filtration performance but it also features an easy-to-inspect sight glass, allowing you to visually check the effectiveness of the filtering process without having to disassemble the unit. Its high capacity design ensures that you won’t have to change out the filter element as often and its corrosion resistant construction adds years of useful life to your investment. Whether you’re looking for a cost effective solution or just want reliable performance, the Racor 120AS Fuel Filter Water Separator is the perfect choice!

Product Details

Round Cylinderical

Product Details	Description
Manufacturer	Racor
Model Number	120AS
Type	Fuel Filter Water Separator
Mounting Method	Surface Mounted
Shape
Dimensions (D x H) (in.) 6.5×8.5	Weight (lbs)	3.1 lbs.

Racor 120AS Fuel Filter Water Separator Pros and Cons

1. Racor 120AS Fuel Filter Water Separator Pros

This Racor 120AS Fuel Filter Water Separator provides excellent filtration for your engine, with a rating of up to 2 microns.

It has a durable design that is resistant to corrosion and can withstand temperature extremes.

The unit is easy to install and maintain, and comes with mounting hardware and instructions.

It can also be used for both diesel and gasoline engines.

The filter has an automatic shut-off valve that will prevent fuel from entering the engine if the filter becomes clogged or blocked.

2. Racor 120AS Fuel Filter Water Separator Cons

This product may not be compatible with some older engines, so it is important to check before purchasing this filter.

If you’re looking for a reliable way to keep your engine running smoothly, the Racor 120AS Fuel Filter Water Separator is a great choice. With its superior filtration capabilities, durable design, and easy installation process, it’s perfect for protecting any diesel or gasoline engine. Plus, its automatic shut-off valve ensures that your engine won’t be damaged by any clogs or blockages in the system. So whether you’re an amateur mechanic or a professional one, this filter is sure to give you peace of mind.

Who are They for

The Racor 120AS Fuel Filter Water Separator is the perfect addition to any engine that needs to keep their fuel tank clean and free of water. This filter is designed to reduce water and contaminants in the fuel, ensuring optimal performance and reliability. The Racor 120AS is a great choice for use on diesel engines, marine engines, lawn mowers, tractors and more. Its simple design allows for easy installation and maintenance.

It features a thermoplastic bowl, which helps protect against corrosion, as well as an automatic drain valve for easy draining of collected water. The Racor 120AS also has an integral mounting bracket for quick and secure installation. The filter comes with a 10 micron filter element which efficiently removes particles down to 10 microns in size. This ensures that your engine runs clean and efficient, while helping extend its life span.

The filter also has an integral sight glass so you can easily monitor the condition of your fuel at a glance. With its durable construction and reliable performance, the Racor 120AS Fuel Filter Water Separator is an ideal choice for keeping your engine running smoothly.

My Experience for Racor 120AS Fuel Filter Water Separator

I used to be a truck driver, hauling heavy loads up and down the country. My job was tough, and I needed my truck to be in top condition at all times. That’s why I decided to get the Racor 120AS Fuel Filter Water Separator.

It not only gave me peace of mind but also saved me money in the long run. The Racor 120AS has two separate filters that work together to keep water out of my fuel tanks and keep them clean of dirt and debris. It also helps improve engine performance by reducing fuel system clogging and improving fuel economy.

The installation process was easy; it took me less than an hour to install the Racor 120AS Fuel Filter Water Separator on my truck. And since then, I’ve seen a significant improvement in my fuel efficiency and overall performance. Plus, it gives me piece of mind knowing that I’m taking care of my truck and helping to ensure its longevity.

If you’re looking for quality fuel filter water separator, the Racor 120AS is definitely worth considering! Not only does it provide superior protection against water contamination, but it’s also super easy to install and maintain. So if you’re like me and want to keep your truck running smoothly, this is a must-have product!

What I don’t Like

1. Installation can be difficult – The Racor 120AS Fuel Filter Water Separator requires an appropriate mounting bracket and installation tools which can add to the difficulty of installation.

2. Needs frequent maintenance – The Racor 120AS needs to be checked every 100 hours of use or every 6 months for optimal performance.

3. Relatively expensive – Although the Racor 120AS is relatively cost efficient when compared to other fuel filter water separators, it is still considered more expensive than some others on the market.

4. May require a bypass valve – For certain applications, a bypass valve may need to be installed in order to ensure that unfiltered fuel does not go through the system.

How to Protect Your Engine with Racor 120AS Fuel Filter Water Separator

Keeping your engine running smoothly and efficiently is essential for protecting its longevity. One of the best ways to do this is by installing a fuel filter water separator, such as the Racor 120AS Fuel Filter Water Separator. This device helps ensure that only clean fuel reaches your engine, and prevents dirt, rust or other contaminants from entering and clogging up vital engine parts. It also traps any moisture that can be present in the fuel, preventing it from damaging internal components.

Step 1: Install The Racor 120AS Fuel Filter Water Separator on the Fuel Line

The first step in using the Racor 120AS Fuel Filter Water Separator is to install it in the line between the fuel tank and the engine. To begin, find an appropriate spot for mounting the filter. Make sure you choose a location that is easily accessible for when it’s time to change or clean the filter element. Once you have chosen a spot, drill two holes in the mounting surface and secure the filter with screws. Then use hose clamps to attach one end of the fuel line to either side of the filter.

Step 2: Connect The Primer Bulb & Bleed Air From The System

After you’ve installed the Racor 120AS Fuel Filter Water Separator, connect a primer bulb between it and the engine’s intake pipe. This will help prime the system after it has been idle for some time or if air has entered due to a recent repair job. Once everything is connected, open up all valves and bleed any air out of the system until only clear fuel is flowing through.

Step 3: Periodically Clean & Maintain The Racor 120AS Fuel Filter Water Separator

Finally, you should periodically inspect and clean your Racor 120AS Fuel Filter Water Separator. This will help keep your engine running at peak performance and prevent any unwanted dirt or contaminants from entering it. To do this, simply unscrew and remove the filter element from its housing, then clean it with soapy water before re-installing it back into place. Doing this regularly will ensure that your engine is always operating at its best.

Questions about Racor 120AS Fuel Filter Water Separator

What is the Racor 120AS Fuel Filter Water Separator?

The Racor 120AS Fuel Filter Water Separator is a diesel fuel filter and water separator designed to remove particulate, debris and moisture from fuel in diesel engines.

How often should I replace the Racor 120AS?

It’s recommended to replace the Racor 120AS every 500 hours of engine operation or at least once a year.

Does it come with any accessories?

Yes. The Racor 120AS comes with all necessary mounting hardware, including mounting brackets and a drain valve.

What is the maximum flow rate of the Racor 120AS?

The maximum flow rate of the Racor 120AS is up to 30 GPH (gallons per hour).

Park Mccoy

Hi, I'm Park and I am an Automotive enthusiast. I have been passionate about cars and their technology since I was a child. As an adult, I have developed a deep understanding of the industry and its advancements. I love to research new cars and share my knowledge with others.