BIGTREETECH SKR V1.4 Control Board With TMC2209 UART Driver For 3D Printer

This BIGTREETECH SKR V1.4 Control Board is the perfect choice for those looking to upgrade their 3D printer with a reliable and powerful control board. The product comes fully integrated with an ultra-quiet TMC2209 UART driver, so you can rest assured that your machine will always run smoothly without any unnecessary noise. With its advanced features, such as low voltage protection, over-temperature protection, and more, this control board is sure to give you optimal performance and peace of mind. In addition, it offers excellent connectivity options for easy integration with other hardware components and software systems. Read on to learn more about the pros and cons of this product.

Table of Contents

BIGTREETECH SKR V1.4 Control Board Integrated with TMC2209 UART Driver Review

BIGTREETECH SKR V1.4 Control Board Integrated with TMC2209 UART Driver:
The BIGTREETECH SKR V1.4 Control Board is the perfect choice for 3D printer enthusiasts looking to get the most out of their machines! This control board features an integrated TMC2209 UART driver that offers incredibly smooth motion and quiet operation, while still remaining affordable. With its powerful 32-bit MCU, you can count on it to deliver consistent and reliable performance over time. And with its easy to use interface, you can take full control of your 3D printing process in no time!

Key Features:

Integrated TMC2209 UART Driver for Smooth Motion & Quiet Operation

Powerful 32-Bit MCU for Consistent & Reliable Performance

Easy to Use Interface for Full Control of Your 3D Printing Process

Support Marlin2.0/Smoothieware/Repetier Firmware

Multiple Connectivity Options Including USB, WIFI, Ethernet & More

If you’re a 3D printing enthusiast who wants to get the most out of their machine without breaking the bank, then the BIGTREETECH SKR V1.4 Control Board Integrated with TMC2209 UART Driver is the perfect choice for you! With its integrated TMC2209 UART driver, powerful 32-bit MCU and easy to use interface, you can ensure your prints are as smooth and quiet as ever. Plus, with multiple connectivity options including USB, WIFI, Ethernet and more, you’ll always be able to stay connected and in control of your 3D printing process. So why wait? Get the BIGTREETECH SKR V1.4 today and start taking your 3D printing to new heights!

Product Details

Product Name	BIGTREETECH SKR V1.4 Control Board Integrated with TMC2209 UART Driver
Model Number	SKR V1.4
Chip	ARM Cortex-M3 series LPC1768
Driver type	TMC2209 UART Driver
Power supply voltage	DC 5V/DC 12V – 24V (12V recommended)
Size	100mm x 75mm x 14.5mm(LWH)
Interface type	USB, SD card reader and WIFI module supported

BIGTREETECH SKR V1.4 Control Board Integrated with TMC2209 UART Driver Pros and Cons

Pros

1. Compact: The BIGTREETECH SKR V1.4 Control Board is incredibly compact, making it easy to install in a variety of 3D printer configurations.
2. Compatible with Marlin Firmware: This board is preloaded with the latest version of Marlin firmware, so you can get up and running quickly.
3. Powerful Performance: The combination of ARM Cortex-M3 CPU and TMC2209 UART driver ensures smooth operation and fast response time while printing.
4. Stable and Reliable: With its powerful processor and robust components, this board can handle even the most demanding prints without any issues.
5. Cost Effective: Despite its high performance capabilities, it comes at an affordable price making it a great value for money option.

Cons

1. Lack of Documentation: Although the board is relatively easy to set up, there is a lack of detailed documentation available on how to use it effectively and troubleshoot issues that may arise during use.
2. Limited Expansion Options: While the board has some expansion options for additional features, these are limited compared to other boards on the market.
3. No USB Interface: Unlike some other control boards, this one does not have a USB interface which can limit its functionality when connecting to a computer or external devices such as cameras or sensors.

Who are They for

BIGTREETECH SKR V1.4 Control Board is an advanced open-source 3D printer control board for your next DIY 3D Printer. It’s integrated with the latest TMC2209 UART Driver, and comes with multiple convenient features like USB Type-C, TFT35 V2.0 support, and more! This control board makes it easier than ever to create a personalized 3D printer.

The TMC2209 UART Driver offers smooth high speed printing while being silent and energy efficient. The driver also provides you with accurate motor current setting that can be adjusted via the SPI interface. With this driver, you can easily achieve a smooth and consistent printing experience.

Another great feature of the BIGTREETECH SKR V1.4 Control Board is its compatibility with the popular Marlin firmware. This means that setting up your 3D printer will be incredibly easy and straight-forward. Plus, you’ll have access to all of Marlin’s features including auto bed leveling, thermal runaway detection, temperature calibration, and more!

For added convenience, this control board also supports TFT35 V2.0 displays! This allows you to make changes to your 3D printer without needing to connect to a computer or laptop. Additionally, it has USB Type-C for quick connection to your PC for firmware updates or for use with OctoPrint.

The BIGTREETECH SKR V1.4 Control Board is perfect for anyone looking to build their own personalized 3D printer or upgrade an existing one. With its powerful TMC2209 UART Driver, Marlin compatibility, and other great features, this control board will take your 3D printing experience to the next level!

My Experience for BIGTREETECH SKR V1.4 Control Board Integrated with TMC2209 UART Driver

As a maker, I love tinkering with my 3D printer. But then I stumbled upon the BIGTREETECH SKR V1.4 Control Board Integrated with TMC2209 UART Driver and my life changed forever. It was like I had been given superpowers!

The BIGTREETECH board is so much more powerful than most control boards out there. For starters, it has an integrated TMC2209 UART driver for current control, which makes it capable of very precise movement. This means that I can print with greater accuracy, faster printing speeds and smoother results. Its 32-bit MCU processor is also extremely fast and efficient, allowing me to print large projects without any lag.

But what really sets the BIGTREETECH board apart is its advanced features like WiFi connectivity, silent stepper drivers and touchscreen support that enable me to customize my 3D printing experience. With these features, I can monitor and adjust my prints remotely, as well as save time by automating certain processes.

The BIGTREETECH SKR V1.4 Control Board has truly revolutionized 3D printing for me. I’m now able to create amazing projects faster and easier than ever before!

What I don’t Like

Product Disadvantages List:
1. The TMC2209 UART driver may be unstable in some occasions, which may lead to inconsistent performance.
2. The instructions for installing the board can be confusing for beginners.
3. The board does not come with a power cable included and must be purchased separately.
4. The SKR V1.4 Control Board has limited support for 3D printers with bigger build volumes.
5. The drivers may overheat quickly when running complex models or larger prints.

How to Setup BIGTREETECH SKR V1.4 Control Board with TMC2209 UART Driver

Setting up a BIGTREETECH SKR V1.4 Control Board Integrated with TMC2209 UART Driver can be quite daunting for those new to 3D printing. However, the process is actually quite simple and straightforward once you have a basic understanding of what you are doing. This guide will walk you through the steps to get your board up and running in no time.

First, you’ll need to connect the power supply to the board. The BIGTREETECH SKR V1.4 has an input voltage range of 12V-24V DC, so make sure your power supply meets this requirement before plugging it into the board. Once connected, you’ll need to connect all of your motors and other peripherals (such as the heat bed and extruder) to the appropriate pins on the board.

Next, you’ll need to install the firmware onto the board. You can find a variety of firmware files for various types of boards online, but for our purposes we’ll use Marlin 2.0 as our firmware of choice for the BIGTREETECH SKR V1.4 with TMC2209 UART Driver. You can download the latest version from their website and then use an FTDI programmer or USBasp programmer to upload it onto your board. Make sure that all of your settings are correct before flashing it onto your board.

Finally, once everything is connected and flashed properly, it’s time to do some calibration and testing. Start by manually moving each motor and making sure they move in the right direction at the right speed. Then proceed to adjust any necessary settings such as steps per mm and acceleration/decceleration rates until everything is working smoothly and accurately. Finally, perform some test prints using different materials and speeds to ensure everything is printing correctly before officially starting your 3D printing journey!

Questions about BIGTREETECH SKR V1.4 Control Board Integrated with TMC2209 UART Driver

What is the BIGTREETECH SKR V1.4 Control Board?

The BIGTREETECH SKR V1.4 Control Board is a powerful 32-bit 3D printer mainboard, designed to help you get the most out of your 3D printer. It has an integrated TMC2209 UART driver for silent and smooth printing, as well as multiple intricate control features and customizable settings for your 3D printer.

What are the advantages of using the BIGTREETECH SKR V1.4 Control Board?

The BIGTREETECH SKR V1.4 Control Board offers many advantages over traditional 3D printer mainboards. It provides a more reliable connection with fewer wiring errors, giving you smoother and quieter prints. The board also supports advanced features like mesh bed leveling and filament runout detection, making it easier to get consistent results every time you print. Additionally, its user-friendly interface makes it easy to customize settings and fine tune your 3D printer’s performance.

How do I set up my BIGTREETECH SKR V1.4 Control Board?

Setting up your BIGTREETECH SKR V1.4 Control Board is easy! Start by connecting the board to your 3D printer’s power supply and stepper motor drivers. Then, download the latest version of Marlin firmware from the BIGTREETECH website and upload it to the board using a USB cable or micro SD card reader. Finally, follow the instructions in Marlin’s configuration files to customize your settings and calibrate your 3D printer for optimal performance.

What safety precautions should I take when using my BIGTREETECH SKR V1.4 Control Board?

When using your BIGTREETECH SKR V1.4 Control Board, make sure to always use appropriate safety equipment such as gloves, safety glasses, and flame retardant clothing when working near hot parts of your 3D printer such as heated beds or nozzle assemblies. In addition, always keep an eye on your machine while it’s running and be sure to unplug all power sources before performing any maintenance work on your 3D printer or its components.

Lawrence Henry

Hi, I’m Lawrence! I’ve always been passionate about technology and gadgets. I love learning new things and exploring the latest advances in electronics. I'm enthusiastic about sharing my knowledge with others and helping them get the most out of their devices.